Brook Wingman SD Converter for Sega Dreamcast and Saturn

Saturn and Dreamcast are the common memory of a generation, and now we provide more ways to tap the potential of these two consoles. Now you can use Xbox One, Xbox 360, PS4, PS3 controllers on them, and the Switch Pro controller, Xbox Elite controller, Xbox Elite Series 2 controller, Xbox adaptive controller, even Retro-Bit Saturn USB controller are all supported with the Brook Wingman SD.

Connecting to the Device

step.1

• Connect Brook Wingman SD to Sega Saturn / Dreamcast / PC via port. Permanently light of the Console Green LED of Wingman SD indicates that the connection to the console is successful.

step. 2

• Wired Connection:
• Connect the Xbox 360 / Xbox One / PS3 / PS4 / Switch wired controller or game pad to Brook Wingman SD through the USB port. Some devices with high power consumption, such as the Switch Pro controller, require an external USB power source for normal use.
• Using a X360 wireless controller:
• Simply connect the wireless X360 wireless receiver to the Brook Wingman SD through the USB port.
• Using Xbox One wireless controller / Xbox One Elite Series 2 controller:
• Connect the Xbox One wireless controller (Bluetooth model) or the Xbox One Elite Series 2 to the Brook Wingman SD and the controller will be ready for use. When connecting, hold the Brook Key on the Wingman SD for 1 second to enter wireless pairing mode. Then press the Pair button on the wireless controller to begin pairing. Fast blinking of Device Red LED of Wingman SD indicates that pairing is in progress.
• Using PS3 / PS4 / Switch Pro wireless controller:
• After completing the connection according to the instructions of the Wired Connection, remove the USB cable, and then wake up the PS3 / PS4 / Switch Pro wireless controller.

step. 3

• Check whether the Device Red LED of the Wingman SD is permanently on. This indicates that the connection is completed.

Switch the input mode on Sega Saturn

The default controller input setting of Brook Wingman SD is “3D Control mode”. When using a standard controller, you can switch to ”Standard mode” manually. The following instructions are based on the Xbox One controller. For those using an other controller, please refer to the Corresponding Buttons List.

Switch to “3D Control mode”:

Press VIEW + Y, the Console Green LED is permanently on.

Switch to “Standard mode”:

Press VIEW + A, the Console Red LED is permanently on.

Switch the input mode on Sega Dreamcast

The default controller input setting of Brook Wingman SD is “Gamepad mode”. When using a arcade stick, you can switch to ”Arcade Stick mode” manually. The following instructions are based on the Xbox One controller. For those using an other controller, please refer to the Corresponding Buttons List.

Switch to “Gamepad mode”:

Press VIEW + Y, the Console Green LED is permanently on.

Switch to “Arcade Stick mode”:

Press VIEW + A, the Console Red LED is permanently on.

Notice:

• Each Brook Wingman SD can only connect to a single Xbox 360 / Xbox One / PS3 / PS4 / Switch device. Wingman SD supports most of the accessories that are compatible with original factory specifications. To expand the number of supported accessories, firmware will be updated regularly.
• Brook Wingman SD does not support headset/microphone function which provides by controller audio jack.
• Please visit the official Brook Website for the most up to date specification and instructions.  PC required for firmware updates.