Brook Wingman NS Adapter
You love your Switch and there are so many great games on it!
But for those of you who are keen to explore the world of gaming, perhaps you’d prefer to use your usual Xbox or PS controller?
The Brook Wingman NS Adapter, is the answer to your prayers!
Here is a quick run down, for full instruction visit the Brook website
This adapter will not work on Xbox or PS4 consoles, check here to see compatible Brook adapters.
Connecting to the Device
- Insert the Brook Wingman NS Adapter into the Switch console USB port. Slow blinking of the Blue LED indicates that the connection to the console is successful.
- Wired Connection:Connect the Xbox 360 / Xbox One / Xbox One Elite2 / PS3 / PS4 / Switch Pro wired controller or game pad to Wingman NS through the USB port.Using a X360 wireless controller:Simply connect the wireless X360 wireless receiver to the Brook Wingman NS Adapter through the USB port.Using Xbox One wireless controller / Xbox One Elite Series 2 controller:Connect the Xbox One wireless controller (Bluetooth model) or the Xbox One Elite Series 2 to the Brook Wingman NS Adapter and the controller will be ready for use. When connecting, hold the LED buttons at the two sides of the Wingman NS for 1 second to enter wireless connection mode. Then press the Pair button on the wireless controller to begin pairing. Fast blinking of Blue LED indicates that pairing is in progress.Using PS3 / PS4 / Switch Pro wireless controller:
After completing the connection according to the instructions of the Wired Connection, remove the USB cable, and then wake up the PS3 / PS4 / Switch Pro wireless controller.
- Check whether the two Blue LEDs at the sides of the Wingman NS are permanently on. This indicates that the connection is completed.
Connection Pairing Supplementary Instructions
- Holding the LED buttons on the two sides of the Brook Wingman NS Adapter for 1 second will activate wireless connection pairing mode. The Wingman NS will engage in pairing with surrounding Bluetooth devices. The pairing mode will end if:
- The connection pairing with the wireless controller is successful.
- The connection pairing is unsuccessful after 1 minute.
- The LED buttons are held for 1 second.
- Wireless connection records between an Xbox One wireless controller (with Bluetooth function)/Xbox One Series 2 and the Brook Wingman NS Adapter will be erased if a wired connection is used. Wireless connection re-pairing will be required if wireless connection is used.
Turbo Function
The following instructions are based on the Xbox One controller. For those using other controller, please refer to the Corresponding Buttons List
Turbo Function Settings
Buttons that can be set as Turbo function buttons include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)
Step 1.Enter setting mode:
Press VIEW + Xbox Guide, the RED LED of the Wingman NS will be permanently on.
Step 2.Choosing a FK button: (e.g. Setting A as turbo function)
Hold VIEW, then press A
Step 3.Completing Setting Mode:
Release all buttons, then press MENU to save settings.
Step 4.Exit setting mode:
Press Xbox Guide, the BLUE LED of the Wingman NS will be permanently on.
Cancelling Turbo Function
Step 1.Enter setting mode:
Press VIEW + Xbox Guide, the RED LED of the Wingman NS will be permanently on.
Step 2.Erasing all Turbo function buttons
Press VIEW + MENU
Step 3.Exit setting mode:
Press Xbox Guide, the BLUE LED of the Wingman NS will be permanently on.
Button Remap
The following instructions are based on the Xbox One controller. For those using other controller, please refer to the Corresponding Buttons List
Button Remap Settings
Buttons that can be remap include: A, B, X, Y, LB, RB, LT, RT, LSB, RSB 10 (hereinafter referred to as FK)
Step 1.Enter setting mode:
Press MENU + Xbox Guide, the RED LED of the Wingman NS will be permanently on.
Step 2.Choosing a FK button: (e.g. Setting X as A+B)
Press X
Step 3.Choosing button to be set:
Hold VIEW, then press A + B.
Step 4.Completing setting mode:
Release all buttons, then press MENU to save settings.
Step 5.Exit setting mode:
Press Xbox Guide, the BLUE LED of the Wingman NS will be permanently on.
Cancelling Button Remap Settings
Step 1.Enter setting mode:
Press MENU + Xbox Guide, the RED LED of the Wingman NS will be permanently on.
Step 2.Erasing all settings for Button Remap Settings
Press VIEW + MENU.
Step 3.Exit setting mode:
Press Xbox Guide, the BLUE LED of the Wingman NS will be permanently on.